Linksys SRW208P Router Login Information

To access your Linksys SRW208P you will need the IP address and the login data (username and password).

Important: This is not the login data for your Internet service provider.

You can find this information in the Manual of your Linksys SRW208P router. If you don't have the manual at hand or don't want to search the complete manual for the login credentials, you can use the Quick install guide which you can find below. To access the router login page it is important that you are connected to the router. Tip: If you have Wi-Fi problems and it is not possible to connect to the router, you can connect your computer and the router with a LAN cable.

Login Guide for Linksys SRW208P

  • Open your preferred browser and enter 192.168.1.254 in the address bar to access admin panel of your router.

    192.168.1.254 login page

  • Then you will see 2 fields where you can enter the router username and password.

    Linksys SRW208P router default login

  • According to our database the default username of your Linksys SRW208P router is admin and the corresponding password is (blank).
  • Enter the username and password, click on the login button and now you should have access to the user interface of the router.

If the credentials do not work, try the following method

In the list below you can find some of the most commonly used username/password combinations of Linksys routers. Try the following combinations. If you have problems logging in to the router or you have forgotten your password.

Username Password
(blank)admin
adminadmin
admin(blank)
admin
(blank)public
adminpassword
comcast1234
n/aadmin
admin
(blank)(blank)
(AA Admin number)4x98
http://192.168.1.245Admin
rootadmin
(blank)epicrouter
created in initial setupadmin
user & admin(blank)
http://192.168.1.246(blank)
(blank)
userprimus
(Linksys Smart Wi-Fi Account)(password for Linksys Smart Wi-Fi Account)
root(blank)

The most common IPs used by Linksys routers

You have tried several different IP addresses and still none of them work? Then you should try the IP addresses from the following list.

Default Router IP
192.168.1.1
192.168.0.1
192.168.1.245
192.168.1.254
192.168.1.250
192.168.15.1
192.168.1.226
192.168.1.252
192.168.1.240
192.168.1.251
192.168.16.1
192.168.100.1
169.254.1.250
10.100.1.1
192.168.1.246
192.168.1.225
10.0.0.1
192.168.1.115
192.168.42.1
192.168.1.99
192.168.1.200
192.168.245
192.168.1.116
192.168.1.210
192.168.1.230
192.168.1.77
192.168.101.1
192.168.1.10
192.168.2.1

Nothing of the methods worked for me and I still not get access to my Linksys SRW208P!

If nothing helped and you really need access to your SRW208P router, there is also the possibility of a factory reset. In most cases you can perform a factory reset by pressing a small button on the back of the router for 10-20 seconds. After that the router lights up and needs some minutes to reset all settings. After a factory reset the router loses the connection to all other connected devices and some devices have to be reconnected to the router after such a reset. If you are unsure, you should consult an expert to help you set up the router again.

More Linksys routers