NEC RG-A100L Router Login Information

To access your NEC RG-A100L ( also known as NEC Wireless N ADSL2+ Modem Router. ) you will need the IP address and the login data (username and password).

Important: This is not the login data for your Internet service provider.

You can find this information in the Manual of your NEC RG-A100L ( also known as NEC Wireless N ADSL2+ Modem Router. ) router. If you don't have the manual at hand or don't want to search the complete manual for the login credentials, you can use the Quick install guide which you can find below. To access the router login page it is important that you are connected to the router. Tip: If you have Wi-Fi problems and it is not possible to connect to the router, you can connect your computer and the router with a LAN cable.

Login Guide for NEC RG-A100L

• Open your preferred browser and enter 192.168.1.1 in the address bar to access admin panel of your router.
  
  

  

• Then you will see 2 fields where you can enter the router username and password.
  
  

  

• According to our database the default username of your NEC RG-A100L router is admin and the corresponding password is 1234.
• Enter the username and password, click on the login button and now you should have access to the user interface of the router.

If the credentials do not work, try the following method

In the list below you can find some of the most commonly used username/password combinations of NEC routers. Try the following combinations. If you have problems logging in to the router or you have forgotten your password.

Username	Password
admin	1234
admin	(blank)
ASPIRE	12345678
	(blank)
(blank)	00000000
ADMIN (caps sensitive)	6633222
2000	CTL
(blank)	(blank)
admin	password

The most common IPs used by NEC routers

You have tried several different IP addresses and still none of them work? Then you should try the IP addresses from the following list.

Default Router IP
192.168.0.1
192.168.10.1
192.168.1.1
192.168.1.250
192.168.179.1
172.16.0.10

Nothing of the methods worked for me and I still not get access to my NEC RG-A100L!

If nothing helped and you really need access to your RG-A100L router, there is also the possibility of a factory reset. In most cases you can perform a factory reset by pressing a small button on the back of the router for 10-20 seconds. After that the router lights up and needs some minutes to reset all settings. After a factory reset the router loses the connection to all other connected devices and some devices have to be reconnected to the router after such a reset. If you are unsure, you should consult an expert to help you set up the router again.

Manuals for NEC RG-A100L

Manual - NEC RG-A100L