Netgear WNDR3400v2-alt Router Login Information

To access your Netgear WNDR3400v2-alt you will need the IP address and the login data (username and password).

Important: This is not the login data for your Internet service provider.

You can find this information in the Manual of your Netgear WNDR3400v2-alt router. If you don't have the manual at hand or don't want to search the complete manual for the login credentials, you can use the Quick install guide which you can find below. To access the router login page it is important that you are connected to the router. Tip: If you have Wi-Fi problems and it is not possible to connect to the router, you can connect your computer and the router with a LAN cable.

Login Guide for Netgear WNDR3400v2-alt

  • Open your preferred browser and enter 192.168.1.1 in the address bar to access admin panel of your router.

    192.168.1.1 login page

  • Then you will see 2 fields where you can enter the router username and password.

    Netgear WNDR3400v2-alt router default login

  • According to our database the default username of your Netgear WNDR3400v2-alt router is admin and the corresponding password is password.
  • Enter the username and password, click on the login button and now you should have access to the user interface of the router.

If the credentials do not work, try the following method

In the list below you can find some of the most commonly used username/password combinations of Netgear routers. Try the following combinations. If you have problems logging in to the router or you have forgotten your password.

Username Password
adminpassword
admin1234
admin
adminadmin
comcast1234
password
(blank)password
attadmin
(blank)admin
admin(blank)
admin(specified by the user)
(blank)1234
attadmin
adminchangeme
(blank)
mso/adminchangeme/password
adminnetgear1
n/an/a
super5777364
cusadmin(blank)
admin(specified by user)
cktadmin
superman21241036
n/apassword
1234
attadmin(blank)
(blank)printed on router
vooWPA key on the label, uppercase
adminsetup
cusadminhighspeed
(blank)(blank)
superuserpassword

The most common IPs used by Netgear routers

You have tried several different IP addresses and still none of them work? Then you should try the IP addresses from the following list.

Default Router IP
192.168.1.1
192.168.0.1
192.168.0.100
192.168.100.1
192.168.1.250
192.168.0.227
192.168.0.101
192.168.61.1
http://www.routerlogin.net
http://www.mywifiext.net
192.168.168.168
192.168.0.233
192.168.0.239
192.168.0.230
192.168.0.228
192.168.0.229
192.168.0.224
www.mywifiext.com
10.0.0.138
172.16.0.1
192.168.0.231
192.168.1.254
192.168.0.235
192.168.0.202
192.168.0.240
192.168.0.226
http://m.home
10.1.10.1
192.168.1.240
192.168.0.237
192.168.0.232
192.168.0.201
192.168.10.1
192.168.0.160
192.168.0.225
192.168.1.251
192.168.0.200
192.168.15.1
192.168.254.254
192.168.58.21
192.168.1.3
192.168.0.102
192.168.0.236

Nothing of the methods worked for me and I still not get access to my Netgear WNDR3400v2-alt!

If nothing helped and you really need access to your WNDR3400v2-alt router, there is also the possibility of a factory reset. In most cases you can perform a factory reset by pressing a small button on the back of the router for 10-20 seconds. After that the router lights up and needs some minutes to reset all settings. After a factory reset the router loses the connection to all other connected devices and some devices have to be reconnected to the router after such a reset. If you are unsure, you should consult an expert to help you set up the router again.

Manuals for Netgear WNDR3400v2-alt

Manual - Netgear WNDR3400v2-alt

More Netgear routers