ZTE MF96 Router Login Information

To access your ZTE MF96 you will need the IP address and the login data (username and password).

Important: This is not the login data for your Internet service provider.

You can find this information in the Quick Install Guide of your ZTE MF96 router. If you don't have the manual at hand or don't want to search the complete manual for the login credentials, you can use the Quick install guide which you can find below. To access the router login page it is important that you are connected to the router. Tip: If you have Wi-Fi problems and it is not possible to connect to the router, you can connect your computer and the router with a LAN cable.

Login Guide for ZTE MF96

• Open your preferred browser and enter 192.168.0.1 in the address bar to access admin panel of your router.
  
  

  

• Then you will see 2 fields where you can enter the router username and password.
  
  

  

• Sometimes you can find the router login data on the back of the router. Alternatively look into the manual that can be found here: Manual of your router.
• Enter the username and password, click on the login button and now you should have access to the user interface of the router.

If the credentials do not work, try the following method

In the list below you can find some of the most commonly used username/password combinations of ZTE routers. Try the following combinations. If you have problems logging in to the router or you have forgotten your password.

Username	Password
admin	admin
user	user
(blank)	admin
	admin
(blank)	(blank)
admin
cytauser	cytauser
admin	password
1admin0	ltecl4r0
(blank)	attadmin
user	(blank)
admin	printed on router
3play	3play
ZXDSL	ZXDSL
attadmin	attadmin
HPN	(blank)
(blank)	smartbro
admin	on router label
admin	bayandsl
	attadmin
Administrator	admin
	password
mtn	admin
(blank)	password

The most common IPs used by ZTE routers

You have tried several different IP addresses and still none of them work? Then you should try the IP addresses from the following list.

Default Router IP
192.168.1.1
192.168.0.1
192.168.2.254
192.168.1.254
192.168.128.1
192.168.200.1
192.168.8.1
192.168.100.1

Nothing of the methods worked for me and I still not get access to my ZTE MF96!

If nothing helped and you really need access to your MF96 router, there is also the possibility of a factory reset. In most cases you can perform a factory reset by pressing a small button on the back of the router for 10-20 seconds. After that the router lights up and needs some minutes to reset all settings. After a factory reset the router loses the connection to all other connected devices and some devices have to be reconnected to the router after such a reset. If you are unsure, you should consult an expert to help you set up the router again.

Manuals for ZTE MF96

Quick Install Guide - ZTE MF96