IBM Router Login Information

To access a IBM router (for example: High Rate Wireless LAN Gateway (DR-E200W) ,2210 or 22P6909 ) you need the corresponding login data and IP address. If you do not know the IP and login information of your router, you will find them in the IBM Router Manual. In case you don't have a manual or don't feel like searching for the data, you can easily use the following login guide.

Select your IBM router

Login Guide for IBM

  • Open your browser (on desktop or mobile) and enter 192.168.1.1 (this is the most common default router IP for IBM routers according to our database) in the address bar to access admin panel of your router.

    192.168.1.1 login page

  • Now you see 2 fields where you can enter the router username and router password.

    IBM router router default login

  • The most common default username/password combination for IBM routers is USERID and PASSW0RD.
  • Enter the username and password, click on the login button and now you should have access to the user interface of the router.

The username/password combination doesn't work ? Then try the following method...

If you know the model name/ID of your IBM router then select your device from the dropdown list below. You will be forwarded to our login guide for your device ( including user manuals etc.).

Select your device

Most common login IPs for your IBM router device

For example, if you want to change the security settings of your IBM router, you need the router IP address. Hardly anybody knows their router IP, because you only need it in rare cases. Often you can find it on the back of your IBM router or in the manual. If you can't find the IP anywhere, you can try the IP addresses from the list below. One of them should lead you to the login page of your IBM router.

Common Router IP
192.168.1.1

Common username/password combinations for IBM routers

We have compiled a list of the most common username/password combinations for IBM routers. Try the different combinations to log in. Often one of the listed combinations works.

Username Password
USERIDPASSW0RD
admin
hscrootabc123
adminadmin
(blank)
adminsecure
webadminwebibm
admin(blank)
I5rDv2b2JjA8MmA52896nG93096a
superadminsecret
IBM
ncadminncadmin
(blank)R1QTPS
adminrsm33inst
vt100public
storwatchspecialist
deftrade
db2admindb2admin
USERIDPASSWORD
rootibm
qpgmrqpgmr
ESSEX(blank)
guestguest
1111111111111111
R1QTPS
usernamepassword
root(blank)
$ALOC$(blank)
default
adminpassword
Administratoradmin
default(blank)
fg_sysadminpassword
$SRV$SRV
wpsadminwpsadmin
ascend
IBMUSERSYS1

IBM Router Manuals

91P7301 - Manual
High Rate Wireless LAN Gateway (DR-E200W) - Manual

These methods don't work for me and I still not get access to my IBM router!

Nothing helped and you don't have access to your router? Then you can do a factory reset. In most cases you can perform a factory reset by pressing a small button on the back of your IBM router for about 10-20 seconds. Afterwards your IBM router lights up and needs several minutes to reset the settings. Because of the factory reset your IBM router loses the connection to all other connected devices and some devices have to be reconnected to the router after such a reset. If you are unsure, you should consult an expert to help you set up the router again.