To access a Intel router (for example: PRO/Wireless 2011B LAN Access Point ,AnyPoint DSL Gateway (Model 4400) or PRO/Wireless 5000 LAN Access Point ) you need the corresponding login data and IP address. If you do not know the IP and login information of your router, you will find them in the Intel Router Manual. In case you don't have a manual or don't feel like searching for the data, you can easily use the following login guide.
Contents
Select your Intel router
Login Guide for Intel
- Open your browser (on desktop or mobile) and enter 192.0.2.1 (this is the most common default router IP for Intel routers according to our database) in the address bar to access admin panel of your router.
- Now you see 2 fields where you can enter the router username and router password.
- The most common default username/password combination for Intel routers is admin and admin.
- Enter the username and password, click on the login button and now you should have access to the user interface of the router.
The username/password combination doesn't work ? Then try the following method...
If you know the model name/ID of your Intel router then select your device from the dropdown list below. You will be forwarded to our login guide for your device ( including user manuals etc.).
Select your device
Most common login IPs for your Intel router device
For example, if you want to change the security settings of your Intel router, you need the router IP address. Hardly anybody knows their router IP, because you only need it in rare cases. Often you can find it on the back of your Intel router or in the manual. If you can't find the IP anywhere, you can try the IP addresses from the list below. One of them should lead you to the login page of your Intel router.
Common Router IP |
192.0.2.1 |
192.168.0.254 |
192.168.0.10 |
Common username/password combinations for Intel routers
We have compiled a list of the most common username/password combinations for Intel routers. Try the different combinations to log in. Often one of the listed combinations works.
Username | Password |
admin | admin |
Intel | Intel |
(blank) | Intel |
admin | hello |
admin | (blank) |
Guest | (blank) |
Intel | |
(blank) | shiva |
khan | kahn |
setup | setup |
Admin | Intel |
(blank) | isolation |
root | admin |
NICONEX | NICONEX |
Intel Router Manuals
AnyPoint DSL Gateway (Model 4400) - Manual
AnyPoint Wireless Gateway (Model 1400) - Manual
AP310 - Manual
Dual Band Wireless-AC 3160 - Manual
Dual Band Wireless-AC 9260 - Manual
Dual Band Wireless-N 7260 - Manual
M3AWEB - Manual
M3AWEB56GA - Manual
PRO/Wireless 2011B LAN Access Point - Manual
PRO/Wireless 5000 LAN Access Point - Manual
Tri-Band Wireless-AC 17265 - Manual
Wireless Gateway (WLGW2011BAK) - Manual
Wireless Gateway II (AP1210) - Manual
WM3965ABG - Manual
WM3A5000 - Manual
WPCI2011B - Manual
WSAP5000 - Manual
These methods don't work for me and I still not get access to my Intel router!
Nothing helped and you don't have access to your router? Then you can do a factory reset. In most cases you can perform a factory reset by pressing a small button on the back of your Intel router for about 10-20 seconds. Afterwards your Intel router lights up and needs several minutes to reset the settings. Because of the factory reset your Intel router loses the connection to all other connected devices and some devices have to be reconnected to the router after such a reset. If you are unsure, you should consult an expert to help you set up the router again.