Cisco WAP4410N Router Login Information

To access your Cisco WAP4410N ( also known as Cisco Wireless-N Access Point with Power Over Ethernet. ) you will need the IP address and the login data (username and password).

Important: This is not the login data for your Internet service provider.

You can find this information in the Manual of your Cisco WAP4410N ( also known as Cisco Wireless-N Access Point with Power Over Ethernet. ) router. If you don't have the manual at hand or don't want to search the complete manual for the login credentials, you can use the Quick install guide which you can find below. To access the router login page it is important that you are connected to the router. Tip: If you have Wi-Fi problems and it is not possible to connect to the router, you can connect your computer and the router with a LAN cable. The default network name (SSID) of your WAP4410N ( also known as Cisco Wireless-N Access Point with Power Over Ethernet. ) router is ciscosb .

Login Guide for Cisco WAP4410N

  • Open your preferred browser and enter 192.168.1.245 in the address bar to access admin panel of your router.

    192.168.1.245 login page

  • Then you will see 2 fields where you can enter the router username and password.

    Cisco WAP4410N router default login

  • According to our database the default username of your Cisco WAP4410N router is admin and the corresponding password is admin.
  • Enter the username and password, click on the login button and now you should have access to the user interface of the router.

If the credentials do not work, try the following method

In the list below you can find some of the most commonly used username/password combinations of Cisco routers. Try the following combinations. If you have problems logging in to the router or you have forgotten your password.

Username Password
CiscoCisco
adminadmin
(blank)(blank)
adminpassword
admin(blank)
(blank)Cisco
adminchangeme
rootattack
cusadminhighspeed
admincisco
user(blank)
Administratorchangeme
bbsd-clientNULL
Administratoradmin
(blank)admin
(blank)riverhead
(blank)
sa(blank)
bbsd-clientchangeme2
(blank)W2402
rootsecur4u
cmaker
EAdmin<systemid>(blank)
Admin123Admin123
prixadminprixadmin
uwmadminpassword
admindiamond
cusadmincusadmin
End User7936
admin1PTV-ADM1N
cable-docsis
admintsunami
(blank)233897301
(blank)changeit
admindefault
bubba(unk)
cmakercmaker
admintelstra
n/a(blank)
netrangrattack
(blank)public/private/secret
superusersuperuser
ATTadmin401!VEN
c
ILMI
adminsystem
hsahsadb
(blank)_Cisco
rootblender
adminW2402

The most common IPs used by Cisco routers

You have tried several different IP addresses and still none of them work? Then you should try the IP addresses from the following list.

Default Router IP
192.168.1.1
192.168.0.1
10.10.10.1
192.168.1.245
10.0.0.1
192.168.100.1
192.168.1.254
192.168.15.1
acquired via DHCP
192.168.1.115
10.1.10.1
192.168.0.0
192.168.10.10
10.128.128.128
10.0.0.2
192.168.75.1/setup

Nothing of the methods worked for me and I still not get access to my Cisco WAP4410N!

If nothing helped and you really need access to your WAP4410N router, there is also the possibility of a factory reset. In most cases you can perform a factory reset by pressing a small button on the back of the router for 10-20 seconds. After that the router lights up and needs some minutes to reset all settings. After a factory reset the router loses the connection to all other connected devices and some devices have to be reconnected to the router after such a reset. If you are unsure, you should consult an expert to help you set up the router again.

Manuals for Cisco WAP4410N

Manual - Cisco WAP4410N
Datasheet - Cisco WAP4410N

More Cisco routers