ZyXEL VMG4381-B10A Router Login Information

To access your ZyXEL VMG4381-B10A you will need the IP address and the login data (username and password).

Important: This is not the login data for your Internet service provider.

You can find this information in the Manual of your ZyXEL VMG4381-B10A router. If you don't have the manual at hand or don't want to search the complete manual for the login credentials, you can use the Quick install guide which you can find below. To access the router login page it is important that you are connected to the router. Tip: If you have Wi-Fi problems and it is not possible to connect to the router, you can connect your computer and the router with a LAN cable.

Login Guide for ZyXEL VMG4381-B10A

  • Open your preferred browser and enter 192.168.200.1 in the address bar to access admin panel of your router.

    192.168.200.1 login page

  • Then you will see 2 fields where you can enter the router username and password.

    ZyXEL VMG4381-B10A router default login

  • According to our database the default username of your ZyXEL VMG4381-B10A router is admin and the corresponding password is 1234.
  • Enter the username and password, click on the login button and now you should have access to the user interface of the router.

If the credentials do not work, try the following method

In the list below you can find some of the most commonly used username/password combinations of ZyXEL routers. Try the following combinations. If you have problems logging in to the router or you have forgotten your password.

Username Password
admin1234
(blank)1234
n/a1234
adminadmin
(blank)admin
1234
12341234
user1234
admin(blank)
webadmin1234
(blank)(blank)
adminpassword
admintelus
supervisorsupervisor
on bottom of routeron bottom of router
(blank)
adminPrinted on Router Label
adminlast 4 of routers mac address
chtchtnvdsl
Printed on Routers LabelPrinted on Routers Label
(blank)
adminabc123
adminrandomly generated
on sticker under the routeron sticker under the router
adminpldt1234567890
admin
admin

The most common IPs used by ZyXEL routers

You have tried several different IP addresses and still none of them work? Then you should try the IP addresses from the following list.

Default Router IP
192.168.1.1
192.168.1.2
192.168.1.254
192.168.10.1
192.168.0.1
acquired via DHCP
10.0.0.138
192.168.1.1:8080
192.168.1.11
192.168.200.1
10.0.0.1
192.168.1.3
192.168.1.5
192.168.2.1
192.168.80.1
192.168.1001
192.168.100.1
192.168.212.1
10.131.52.162
192.168.3.1
192.168.254.254

Nothing of the methods worked for me and I still not get access to my ZyXEL VMG4381-B10A!

If nothing helped and you really need access to your VMG4381-B10A router, there is also the possibility of a factory reset. In most cases you can perform a factory reset by pressing a small button on the back of the router for 10-20 seconds. After that the router lights up and needs some minutes to reset all settings. After a factory reset the router loses the connection to all other connected devices and some devices have to be reconnected to the router after such a reset. If you are unsure, you should consult an expert to help you set up the router again.

Manuals for ZyXEL VMG4381-B10A

Manual - ZyXEL VMG4381-B10A

More ZyXEL routers